DC*1 14#-18# Industrial Overlock and Serger Machine Needles

Größe DC*1 14#-18#

Verpackung: 10 Stück/Karte, 100 Stück/Karton

MH DC*1 needle is a round-shank industrial sewing machine needle for overlock and serger machines, offered in sizes 14#-18# (NM 90-110).

Built to the DC*1 needle system, the needle drops into the many industrial overlock and serger machines that use that system. It is made from hardened steel and finished with a round shank and a point geometry suited to high-speed edge and seam finishing on woven and knit fabrics.

The 14# to 18# range (NM 90, 100, 110) lets a workshop match needle size to fabric weight, moving from lighter to heavier material without changing machine setup.

Wichtige Verkaufspunkte

• DC*1 system fit: The MH DC*1 needle matches the DC*1 system used across many industrial overlock and serger machines, making it a direct replacement.
• Built for high speed: MH forms the needle from hardened steel with a round shank, holding its point and alignment through continuous industrial overlocking.
• Fabric-matched sizing: Offered across a size range, the MH DC*1 needle lets operators pair needle gauge to fabric weight for clean seam and edge finishing.
• Consistent point geometry: MH controls point shape run to run, so stitch penetration stays even and fabric damage is minimised on knits and wovens.
• Großhandelslieferung: MH ships DC*1 needles in bulk card and box quantities for garment factories, repair networks, and OEM machine builders.